Products

Everything included in the package

Nozzle

Both hoses for the bilge pump and nozzle have a 50 mm / 2-inch hose for the best power output. I’ve found restricting it with smaller hoses lessens the suction capability.

The intake is made using curved solid round bars, which makes removing rocks and debris a lot easier. It also increases the suction as it is more free flowing as the round bars are not attached straight to the pipe.

The 45-degree angle on your traditional nozzle has been smoothened out in order to enhance the water flow.

Lars Sluice

Inspired by an idea from Lars, founder
of Ädelfors in Sweden, this sluice takes a different approach to gold recovery.

Instead of a long sluice angled downwards, the design is short and angled upwards. A built-in drop slows the material down, helping gold settle while allowing most of the concentrates to pass through.

After extensive testing, I’ve stopped using conventional sluices altogether.

The mat is just 30 cm (12 inches) long and fits directly into a standard gold pan. No more carrying buckets of concentrates.

A simple clevis and cotter pin make removing and reinstalling the mat quick and easy.

Sluice box pontoon

A floating pontoon with the combination of the design of the sluice. The hose is leveled with the water at all times. The body is waterproof, however the hexagon pipes are not. Reason being is that the pontoon becomes more stable when it’s slightly filled with water.

It is easy to adjust with wingnuts, just screw them upwards if there is a lot of pressure in your nozzle. For instance, when you are going deep or dredging downwards in a high flowing creek or river.

 

My own design for ensuring no twigs, leaves or rocks can enter the intake of the bilge pump. Also ensuring continual flow in any situation, so you never have to worry about pausing or stopping your prospecting trip.

Bilge pump float ring

This float ring keeps your bilge pump afloat and level at all times. So, your hose will always be straight and there of the suction in your nozzle will never diminish.

It also makes is easier to move around freely and you don’t have to attach the bilge pump using rocks or tying knots to keep it in place in order for it not to sink.

Pump house adapter

Designed for a Seafloo 4700 gph bilge pump,
so you can easily fit your hose without losing pressure on the back end.

Weight in total ≈ 6.5 kg / 14.33 lbs